The IPC/EIAJ – STD – 005

Specification requirements for solder paste I include appendix I. The characteristics and technical requirements of solder paste are listed, as well as the test method and standard of metal content, as well as the viscosity, collapse, solder ball, viscosity and solder paste’s tin coating performance.

The IPC/EIAJ – STD – 006 – a

Specification requirements for electronic grade solder alloys, flux and non-flux solid solder. For electronic grade solder alloys, for rod-shaped, banded, powdery and non-flux solder, for electronic applications, for special electronic grade solder, provides terminology, specification requirements and test methods.

The IPC – Ca – 821

General requirements for thermal conductive adhesives. Includes requirements and test methods for attaching components to heat-conducting dielectric in a suitable position.

The IPC – 3406.

Guide for coating adhesives on conductive surfaces. It provides guidance for the selection of conductive binder as an alternative to solder in electronic manufacturing.

The IPC – AJ – 820

Assembly and welding manual. Includes a description of inspection techniques for assembly and welding, including terms and definitions; Reference and outline of printed circuit boards, types of components and pins, materials for welding spots, installation and design of components; Welding technology and packaging; Cleaning and film covering; Quality assurance and testing.

The IPC – 7530.

Guide to temperature curves for batch welding processes (reflow and wave soldering). All kinds of testing methods, techniques and methods are used in the acquisition of temperature curve to provide guidance for the establishment of the best graph.

The IPC – TR – 460 – a

Troubleshooting list of printed circuit board crest welding. A recommended list of corrective actions for faults that may be caused by crest welding.

The IPC/EIA/JEDECJ – STD – 003 – a

Solderability test of printed circuit board.

J – STD – 013

Ball-foot lattice point array packaging (SGA) and other high density technology applications. Establish the specification requirements and interactions required for the PCB packaging process to provide information on high performance and high pin number IC packaging interconnections, including design principles information, material selection, board manufacturing and assembly technologies, test methods, and reliability expectations based on the end-use environment.

The IPC – 7095.

Design and assembly process complements of SGA devices. Provide a variety of useful operational information for people who are using SGA devices or considering switching to the field of array packaging forms; Provide guidance and reliable information on SGA field for SGA testing and maintenance. Circuit board industry standards, and common printed circuit board standards you know how much?

This paper lists some common printed circuit board standards for your reference.

The IPC – ESD – 2020

Electrostatic discharge control program development joint standard. Including the design, establishment, implementation and maintenance of electrostatic discharge control program. Based on the historical experience of some military organizations and commercial organizations, it provides guidance for the treatment and protection during the sensitive period of electrostatic discharge.

The IPC – SA – 61 – a

Manual for cleaning half water after welding. This includes all aspects of semi-aqueous cleaning, including chemical, production residues, equipment, process, process control, and environmental and safety considerations.

The IPC – AC – 62 – a

Water cleaning manual after welding. Describe manufacturing residues, types and nature of aqueous cleaners, aqueous cleaning processes, equipment and processes, quality control, environmental control and staff safety and cleanliness measurements and costs.

The IPC – DRM – 40 e

Through hole welding spot evaluation table reference manual. Detailed description of components, hole walls and welding surfaces as required by the standard, in addition to computer-generated 3D graphics. It covers tin filling, contact Angle, tin dipping, vertical filling, pad covering, and numerous weld spot defects.

The IPC – TA – 722

Welding technique evaluation manual. It includes 45 articles on various aspects of welding technology, covering common welding, welding materials, manual welding, batch welding, wave welding, reflow welding, gas phase welding and infrared welding.

The IPC – 7525.

Template design guide. Guidelines for the design and manufacture of solder paste and surface-mount binder coated templates are also discussed. Quincy technology, including overprinter, double printing and stage template design.

The IPC/EIAJ – STD – 004

Specifications for flux 1 include appendix I. Organic and inorganic flux containing technical indicators and classification of rosin, resin, etc. according to the halide content and activation degree of flux; Also included are the use of fluxes, substances containing fluxes, and low-residue fluxes used in cleaning-free processes.

The IPC – M – I08

Cleaning instruction manual. Includes the latest version of IPC cleaning instructions to assist manufacturing engineers in determining the product cleaning process and troubleshooting.

The IPC – CH – 65 – A

Cleaning guide for printed circuit board assembly. It provides reference for current and emerging cleaning methods in the electronics industry, including the description and discussion of various cleaning methods, and explains the relationship between various materials, processes and contaminants in manufacturing and assembly operations.

The IPC – SC – 60 a

Manual for cleaning solvent after welding. The application of solvent cleaning techniques in automatic and manual welding is presented. The properties of solvents, residues, process control and environmental problems are discussed.

The IPC – 9201.

Surface insulation resistance manual. It covers the terminology, theory, test process and test method of surface insulation resistance (SIR), as well as temperature and humidity (TH) test, fault mode and troubleshooting.

The IPC – DRM – 53

Electronic assembly desktop reference manual introduction. Drawings and photographs illustrating through-hole installation and surface-mount assembly techniques.

The IPC – M – 103

Surface mount assembly manual standard. This section contains all 21 IPC files related to surface mount.

The IPC – M – I04

Printed circuit board assembly manual standard. Contains the 10 most widely used files on printed circuit board assembly.

The IPC – CC – 830 – b

Performance and identification of electronic insulating compounds in printed circuit board assembly. Protective coatings meet an industry standard for quality and qualification.

The IPC – S – 816

Technical guide and list of surface mount technology. The troubleshooting guide lists all types of process problems encountered in surface-mount assembly and their solutions, including bridging, missed welds, and uneven placement of components.

The IPC – CM – 770 – d

Printed circuit board components installation guide. Provides effective guidance for the preparation of components in PCB assembly, and reviews relevant standards, impact, and distribution, including assembly techniques (manual and automatic, as well as surface-mount and flip-chip) and considerations for subsequent welding, cleaning, and lamination processes.

The IPC – 7129.

DPMO calculation and manufacturing index of printed circuit board assembly. Benchmark indicators agreed by industry departments concerned with calculation defects and quality; It provides a satisfactory method to calculate the number of failures per million.

The IPC – 9261.

Production estimates of printed circuit board assemblies and failures per million times during assembly. A reliable method is defined to calculate the number of failures per million times during the assembly of printed circuit boards.

The IPC – D – 279

Reliable surface mount technology guide for PCB assembly design. Guide to the reliability manufacturing process of surface mount and hybrid printed circuit boards, including design ideas.

The IPC – 2546.

Printed circuit board assembly delivers the essential combination requirements. Material motion systems such as actuators and bumpers, manual placement, automatic screen printing, automatic binder distribution, automatic surface-mount placement, automatic plating through hole placement, forced convection, infrared reflow furnaces, and wave soldering are described.

The IPC – PE – 740 – a

Troubleshooting in PCB manufacturing and assembly. This includes case records and calibration activities of printed circuit products that have encountered problems during design, manufacture, assembly and testing.

The IPC – 6010.

Printed circuit board quality standards and performance specifications series of manuals. Including the quality and performance specification standards of all printed circuit boards established by the American printed circuit board association.

The IPC – 6018 – a

Inspection and testing of microwave finished printed circuit board. Includes high frequency (microwave) printed circuit board performance and qualification requirements.

The IPC – D – 317 a

High – speed technical electronic packaging design guidelines. Provides guidance for high speed circuit design, including mechanical and electrical considerations and performance testing.