Author: judith | Page 66 | XinJiaYe PCB Manufactory

What components of the components that are removed from the board with the soldering iron are damaged? What should I pay attention to?

In the initial stage of debugging and the maintenance stage of the circuit board, the replacement and replacement of components are encountered. Disassembling the components is a technically hard work. If you pay attention to it, it will cause damage to the disassembled components. Even damaged the pad. The electronic components are sensitive to temperature. [...]

judith2019-10-28T02:46:21+00:00October 28th, 2019|

Water-based cleaning boards, how to consider material compatibility issues?

In the SMT electronics manufacturing process, PCBA or circuit board / circuit board water-based cleaning process, how do we balance water-based cleaning and material compatibility issues? Water-based cleaning needs to be controlled from the cleaning process. The requirements and material factors that affect the cleaning process include circuit density, component height, flux residual composition, reflow [...]

judith2019-10-28T02:40:21+00:00October 28th, 2019|

LED touch dimming table lamp control circuit board works

A beautiful and practical table lamp can be called a piece of art on a desk. Looking at the beautiful and beautiful table lamp on the desk may add some reading pleasure. So what is the working principle of the touch switch lamp? Two-button touch dimming circuit board working principle: One or two button touch [...]

judith2024-03-20T13:21:43+00:00October 28th, 2019|

What is the role of Shen Jin and Jin Jin in PCB board?

First of all, let's first introduce what is Shen Jin? The copper on the circuit board is mainly copper. The brazing joints are easily oxidized in the air. This causes electrical conductivity, that is, poor tin or poor contact, which reduces the performance of the board. Therefore, the brazing points need to be surface treated. [...]

judith2019-10-28T01:38:38+00:00October 28th, 2019|

Analysis of basic knowledge of circuit board proofing

Circuit board proofing (PCB proofing) refers to the trial production of printed circuit boards before mass production. The main application is the process of small-scale trial production by the electronics engineer after designing the circuit and completing the drawing of the PCB to the circuit board factory. Proof for board (PCB proofing). Circuit board proofing [...]

judith2024-03-20T13:21:43+00:00October 28th, 2019|

What do you need to learn to repair a circuit board?

According to the experience and insights I gained while repairing the circuit board, I would like to share with you friends. Our friends who have repaired electronic products know that in a complete electronic product, there is usually a piece of circuit board that is placed in different positions in the electrical appliance according to [...]

judith2024-03-20T13:21:43+00:00October 21st, 2019|

Analysis of basic knowledge of circuit board proofing

Circuit board proofing (PCB proofing) refers to the trial production of printed circuit boards before mass production. The main application is the process of small-scale trial production by the electronics engineer after designing the circuit and completing the drawing of the PCB to the circuit board factory. Proof for board (PCB proofing). Circuit board proofing [...]

judith2024-03-20T13:21:43+00:00October 21st, 2019|

From the thyristor in the physical instrument circuit board, introduce the basic principles

Yesterday, a physical experiment instrument was dismantled, and the EDM timer was used. The error mark on the instrument label was the electromagnetic dot timer. After dismantling and analyzing from the structure diagram, it can be seen that there is an electronic circuit inside, and the working power source is 220 volt AC, which is [...]

judith2024-03-20T13:21:43+00:00October 21st, 2019|

Research on the Evolution and Development Trend of Integrated Circuit Board-Electronic Process Cleaning Technology

In the previous article, we conducted a comprehensive analysis of the sources, classifications, and hazards of pollutants generated in electronic processes. This article will introduce the evolution and development trends of cleaning technologies involved in electronic processes, and classify the currently used cleaning technologies. By comparing the advantages and disadvantages of different types of electronic [...]

judith2024-03-20T13:21:43+00:00October 21st, 2019|

The hazard of scrapped circuit boards and how to recycle boards

Board damage: In the world, billions of boards are shipped from manufacturers every day. In our daily life, the waste circuit boards are also continuously produced, and the accumulation of used circuit boards has caused great harm to the ecological environment and even our body. The electronic components in the circuit board contain heavy metals [...]

judith2019-10-21T02:15:47+00:00October 21st, 2019|

Tel:+86 755 21638081 info@xjypcb.cn |

|

judith

About judith